• Test Leads
• Users manual
• Carrying case

Download Data Sheet

View Optional Accessories

Specifications
Voltage AC (50 to 500 Hz)	Range: 1.3 V to 750.0 V Accuracy: ±(1.5% + 3 dgt)
Voltage DC	Range: 1.8 V to 1000.0 V Accuracy: ±(1% + 2 dgt) Range: -0.6 V to -1000.0 V Accuracy: ±(1% + 4 dgt)
Overvoltage Protection	Range: 1000 V dc/750 V ac
Input Impedance £	4 k Ω W for input voltage up to 30 V. Impedance increases with input voltage to approximate 300 k Ω at 1000 V/277 k Ω at 750 V ac.
Resistance and continuity	Range: 0.0 Ω to 99.9 Ω Accuracy: ±(2% + 1 Ω ) Range: 100.0 Ω to 2000 Ω Accuracy: ±(2% + 2 dgt)
Overload Protection	Range: 1000 V dc / 750 V rms
Maximum Open Circuit Voltage	Range: 1.5 V
Continuity Check	Internal sounds activate if the resistance of the circuit under test is less than 25 Ω. It will then turn off if the resistance is increased beyond 150 Ω. Temperature coefficient multiply by 1.5 when operating temperature is 40 °C to 50 °C.
AC Current (50 to 60 Hz)	Range: 0.0 to 60.0 A Accuracy: ±(1.9% + 2 A) Range: 60.0 to 400.0 A Accuracy: ±(1.9% + 5 A) Range: 401 to 500.0 Accuracy: ±(2.5% + 7 A) Range: 501 to 600.0 A* Accuracy: ±(3% + 10 A)
Overload Protection	Range: 0 to 500 A: Continuous operation

* 501 A to 600 A: 10 minutes maximum followed by 10 minute cooling period

General Specifications
Display	6000 digit large scale liquid crystal display (LCD)
Measuring Rate	5 times per second
OverRange Display	OL is displayed
Automatic Power Off Time	Approximately 30 minutes after power on
Low Battery Indication	The battery symbol is displayed when the battery voltage drops below the operating level for accurate results.
Power	Single standard 9 V battery, NEDA160A
Battery Life	250 hours with an alkaline 9 V battery
Environmental	Indoor use
Operating Temperature	0 °C to 30 °C at < 80 % R.H. 30 °C to 40 °C at < 75 % R.H. 40 °C to 50 °C at < 45 % R.H.
Storage Temperature	-20 °C to 60 °C at 0 to 80 % R.H. (battery removed)
Altitude	2000 m (6562 ft)
Conductor Size	32 mm diameter (1.3 in)
Max. Operation Time	Delay Time = 30s for input < 30 V
Shock Vibration	Sinusoidal vibration per MIL-PRF-28800F (5 to 55 Hz, 3 G max)
Agency Approvals	CE, cCSAus
Safety	Conforms to EN61010-1:2001; CAT II 1000 V, CAT III 600 V, Pollution degree 2, Class 2
EMC	Conforms to EN61326-1. This product complies with requirements of the following European Community Directives: 89/ 336/ EEC (Electromagnetic Compatibility) and 73/ 23/ EEC (Low Voltage) as amended by 93/ 68/ EEC (CE Marking). However, electrical noise or intense electromagnetic fields in the vicinity of the equipment may disturb the measurement circuit. Measuring instruments will also respond to unwanted signals that may be present within the measurement circuit. Users should exercise care and take appropriate precautions to avoid misleading results when making measurements in the presence of electronic interference.