testtools

Features 80 watts of power for faster heat up and better performance even on heavy ground planes and multi-layer boards. Higher power translates into less time spent on the PC board and less potential for damaging components. Temperature is adjustable from 50°C to 550°C using push-button control and a digital display. Utilizes a self-contained internal rotary vane pump, which generates 20.7" Hg of vacuum pressure and airflow of 1 to 10 liters/min., eliminating the need for shop air. To avoid clogging, a vacuum delay feature on desoldering tool allows solder to reach solder collection chamber before vacuum is shut off. Solder trap filter is constructed of disposable cardboard to make cleanout quick and easy. Threadless DX Series desoldering tiplets will not seize to the heater after continual heat-up and cool-down cycles.

The station is able to identify the tool in use and calibrates itself automaticallyfor the tool in use.

Features:

• Digital temperature control
• ESD Safe
• Operator lock-out
• Stand-by function
• Temp range: 50 - 450°C

Package consits of:

• WMD1S Power Unit
• DS80UNC Pencil
• AK20 Pencil Stand

View Replacement Tips

View Tool Selection Chart

Download Brochure

Features 80 watts of power for faster heat up and better performance even on heavy ground planes and multi-layer boards. Higher power translates into less time spent on the PC board and less potential for damaging components. Temperature is adjustable from 50°C to 550°C using push-button control and a digital display. Utilizes a self-contained internal rotary vane pump, which generates 20.7" Hg of vacuum pressure and airflow of 1 to 10 liters/min., eliminating the need for shop air.

The station is able to identify the tool in use and calibrates itself automaticallyfor the tool in use. 

Features:

• Digital temperature control
• Digital air flow control
• ESD Safe (not air)
• Operator lock-out
• Stand-by function
• Temp range: 50 - 550°C
• Air flow: 5 - 50L/min

Package consits of:

• WMD1S Power Unit
• HAP1 Pencil
• KH27 Pencil Stand

View Tool Selection Chart

Download Brochure

The WHPS80 provides underside heating to the board during rework, reducing the heat requirement from the hot air pencil and therefore minimising the risk of thermal damage to the board, as well as speeding up the repair process. The WHPS80 requires control and power from an external station. 

Features:

• Heating area: 80 x 50mm 
• Temp range: 50 - 200°C

Package consits of:

• WHSP80 Pre-heat plate
• Requires a power source

Download Brochure

The WHP3000 provides underside heating to the board during rework, reducing the heat requirement from the hot air pencil and therefore minimising the risk of thermal damage to the board, as well as speeding up the repair process. The heated surface comprises of 3 high temperature ceramic elements that ensure fast and efficient heating. An external temperature sensor can be connected to display actual temperatures at specific areas of the board during rework.

Features:

• Digital temperature control
• Display indicates set temp & actual temp
• Heating area: 120 x 190mm 
• Temp range: 50 - 400°C

Package consits of:

• WHP3000 Pre-heat plate

Download Brochure